Posted by EB on January 06, 1999 at 18:04:37:
In Reply to: 4 WHEEL DRIVE NOT WORKING posted by RAY KARASEK on January 02, 1999 at 18:34:10:
: MY FOUR WHEEL DRIVE IS NOT WORKING. THE TRANSFERCASE IS SENDING POWER TO THE FRONT WHEELS....BUT THE FRONT WHEELS ARE NOT TURNING....CAN ANYONE HELP ME PLEASE E-MAIL ME ASAP THANK YOU RAY KARASEK
Hi Ray,
I've actually had 2 problems similar to what you are describing, one was a blown clutch (no power to any wheels) and the other was only stoping the front wheels from engaging.
I'll assume that your back wheels spin.
The front wheels not spinning was caused by a bad vaccum line to the daipham that engages the front wheels.
This was fixed by the dealership a few days after I picked up my Jeep. There were also linkage problems that were preventing it from going into 4Low, but I think it was unrelated to the problem with the front wheels.
I'm not a mechanic, so I can't say for sure that this is your problem, but I'd take a look at the vaccum lines, you may have just knocked one loose and it may (hopefully) be a quick fix.
Let me know how things work out,
EB
EB@KumaWeb.com